| Author | Topic: How to Build a Gable Porch Roof |
Anonymous
Anonymous Poster
From Internet Network:
103.81.92.x
| posted: 12/9/2022 at 8:15:54 AM ET
How to Build a Gable Porch Roof
1. Make the lathing
Type of the lathing depends on the aim of the roof. For metal tiles sparse lathing will be suitable, but for bituminous tiles solid lathing will do.
2. Make a truss system
The design of a simple gable roofCompile the rafters on the ground, and then raise the prepared sections upwards. Each section is fixed to the wall plate.
3. Fasten the wall plate
4. Mount the ridge
Install the ridge beam consisting of two bars. Mounting of the ridge is conducted after waterproofing. If the width of the rafters’ props is more than 21 ft, apply the method with the slanting rafters. This method is more complicated than installation with hanging rafters, as it requires using intermediate props and an additional ridge.
|
streameast001
Registered User
Registered:
6/22/2022 | posted: 12/9/2022 at 10:56:52 AM ET
Superior post, keep up with this exceptional work. It's nice to know that this topic is being also covered on this web site so cheers for taking the time to discuss this! Thanks again and again!free movies
|
streameast001
Registered User
Registered:
6/22/2022 | posted: 12/9/2022 at 10:57:24 AM ET
Superior post, keep up with this exceptional work. It's nice to know that this topic is being also covered on this web site so cheers for taking the time to discuss this! Thanks again and again!
free movies
|
